Other information:
Inspection
1.
Turn the ignition switch OFF and disconnect the auxiliary battery (12V) negative (-) terminal.
2.
Connect the GDS to DLC.
3.
Turn the ignition switch ON.
4.
Inspect "Control Duty" and waveforms according to "Fan Status" by performing "Actuation Test" on GDS.
Cooling ...
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) from front hub.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
Be careful not to da ...