Other information:
Description
Battery Current Sensor is installed in the Power Relay
Assembly and it measures the current when the high voltage battery is
being charged or discharged.
[With High Voltage Battery Heater System]
1. Main Relay (+)2. Main Relay (-)3. Pre Charge Relay4. Pre Charge Resistor5. B ...
Description
Installed in MDPS (Motor Driven Power Steering), the Steering
Angle Sensor (SAS) sends signals to HECU through CAN communication
line.
The SAS is used to determine turning direction and speed of the steering wheel.
The HECU uses the signals from the SAS when performing ESP-relat ...