Kia Soul EV: EV Battery System / High Voltage Charging System

Inlet Temperature Sensor Repair procedures

Inspection 1. Turn the ignitionswitch OFF. 2. Shut off the high voltage. (Refer to Battery Control System - "High Voltage Shut-off Procedure") 3. Remove the high voltage battery System a ...

Components and Components Location

Components 1. On-Board Charger (OBC)2. Rapid Charge Port3. Normal Charge Port4. High Voltage Battery ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Battery Temperature Sensor Repair procedures

Installation     Battery temperature sensor can not be disassembled. 1. Turn the ignition switch OFF. 2. Shut off the high voltage. (Refer to Battery Control System - "High Voltage Shut-off Procedure") 3. Remove the high voltage battery system assembly. (Ref ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Rear Wiper Motor Repair procedures

Inspection Rear Wiper Motor 1. Remove the connector from the rear wiper motor. 2. Connect battery positive (+) and negative (-) cables to terminals 2 and 1 respectively. 3. Check that the motor operates normally. Replace the motor if it operates abnormally. No.Description1Battery (+) ...