Specification
ItemSpecificationRemarkRAD Combined Resistance (?)Less than 3 (20°C)Checkable by multi testerRAD Terminal Resistance (?)Less than 0.375 (20°C)Checkable by multi testerRAD Switch P ...
Description
RAD is installed on each battery module.
If the high voltage battery is swollen by cell overcharge, RAD cuts the ground of the main relay and the pre-charge relay.
If the cell is ove ...
Removal
1.
Turn ignition OFF and disconnect the negative (-) battery cable.
2.
Remove the floor console assembly.(Refer to Body - “Floor console assembly")
3.
Disconnect the EPB control unit mounting nuts and then remove EPB control unit.
Tighten torque:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 ...