Kia Soul EV: Driveshaft and axle / Special Service Tools

Kia Soul EV (PS EV) 2015-2020 Service Manual / Driveshaft and axle / Special Service Tools

Special Service Tools
Tool Name / Number
Illustration
Description
Band installer
09495-3K000

Used to install ear type boot band
Puller
09495-33000

Used to remove spider assembly
Ball joint puller
09568-34000

Used to separate ball joint from the front axle.

Specifications
Specification MotorJoint typeMax. permissible angleOuterInnerOuterInner80KWBJ#92TJ#9245°21° Tightening Torques ItemN.mkgf.mIb.ftFrontTire wheel hub nuts88.3 ~ 107.99.0 ~ 11.065.1 ~ 79.6D ...

Troubleshooting
Troubleshooting Trouble SymptomProbable causeRemedyVehicle pulls to one sideScoring of driveshaft ball jointReplaceWear, rattle or scoring of wheel bearingReplaceDefective front suspension and st ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Hazard Lamp Switch Repair procedures


Inspection 1. The SJB can be diagnosed by using the GDS. The SJB communicates with the GDS which then displays inputs and outputs along with codes. It will be able to quickly diagnose defects of hazard lamp switch with GDS. GDS can forcefully operate actuator, monitor input/output value ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Front Hub / Knuckle Repair procedures


Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)     Be careful not to da ...

Copyright © www.ksoulev.com 2020-2025