Kia Soul EV: Heater / Temperature Control Actuator Description and Operation
The heater unit includes mode control actuator and temperature control actuator.
Located in the heater unit, the temperature control actuator regulates the temperature in the following procedures.
Signal from control unit adjusts the position of the
temperature door by operating the temperature switch. Then the
temperature will be regulated by the hot/cold air ratio decided by the
position of the temperature door.
Inspection
1.
Check for output signal in the heater and A/C control unit.
2.
Using the GDS, check whether there is a problem in the interlock.
3.
Check whether the low voltage (12V) is sup ...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the temperature control actuator connector.
3.
Verify that the temperature control actuator operates to the
cool position when 1 ...
Other information:
Inspection
Power Window Main Switch Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
3.
Disconnect the connector (A) from the power window switch module.
4.
Check for continuity between the terminals in e ...
Description
Description of EPB
EPB is an electronic parking brake. Unlike existing parking
systems that operate by brake pedals or levers, the EPB system sends a
signal to the ECU when the driver operates the EPB switch. The ECU then
operates the EPB actuator with motor gears to push the ...