Other information:
Inspection
Antenna Cable
1.
Remove the antenna jack from the audio unit and antenna.
2.
Check for continuity between the center poles of antenna cable.
3.
Check for continuity between the outer poles of antenna cable. There should be continuity.
4.
If there is no continuity, replace ...
System Circuit Diagram
Connector Location
BMS ECU Connector And Terminal Function
BMS ECU Terminal Function
A Connector [B01-A] (35 Pin) - Voltage Measurement Connector
Pin no.DescriptionConnected to1Battery Cell [Module 8/Cell 13] Voltage InputBattery Cell [Module 8/Cell 13]2Battery Cell ...