Other information:
Inspection
1.
Turn the ignition switch ON.
2.
Connect the GDS.
3.
Emit intensive light toward the photo sensor using a lamp, and check the output voltage change.
4.
The voltage will rise with higher intensive light and reduce with lower intensive light.
1. Auto Light Signal2. Auto ...
Removal
1.
Open the roller blind using the panorama sunroof switch.
•
Leave 10 ~ 20cm (0.3937 ~ 0.7874 in) of the roller blind unopened.
2.
Remove the roof trim.
(Refer to Roof Trim - "Roof Trim Assembly")
3.
Remove the roller blind bar (C) by ...