Kia Soul EV: Heating,Ventilation, Air Conditioning / Heat Pump
- Description and Operation
- Refrigerant Direction Control Valve Components and Components Location
- Refrigerant Direction Control Valve Description and Operation
- Refrigerant Direction Control Valve Repair procedures
- Accumulator Components and Components Location
- Accumulator Description and Operation
- Accumulator Repair procedures
- Refrigerant Temperature Sensor Components and Components Location
- Refrigerant Temperature Sensor Description and Operation
- Refrigerant Temperature Sensor Repair procedures
- Inner Condenser Components and Components Location
- Inner Condenser Description and Operation
- Inner Condenser Repair procedures
- Outer Condenser Components and Components Location
- Outer Condenser Description and Operation
- Outer Condenser Repair procedures
- Chiller Components and Components Location
- Chiller Description and Operation
- Chiller Repair procedures
- 3-Way Coolant Valve Components and Components Location
- 3-Way Coolant Valve Description and Operation
- 3-Way Coolant Valve Repair procedures
Auto Defogging Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the negative (-) battery terminal.
3.
Verify that the auto defogging actuator operates to the open
position when 12V is connecte ...
Description and Operation
Heat Pump Configuration and Operation
Heat pump is configured to circulate refrigerant flow for cooling/heating function.
This process minimizes battery consumption by the heater resulting in enha ...
Other information:
Kia Soul EV (PS EV) 2015-2020 Service Manual: Repair procedures
Replacement 1. Remove the cap (A), the nuts and the wiper arm (B). Tightening torque : 22.6 ~ 26.5 N.m(2.3 ~ 2.7 kgf.m, 16.6 ~ 19.5 lb-ft) 2. Remove the glue from both ends (A) of the hood weatherstrip. 3. Disconnect the cowl top cover nozzle hose (A). 4. Detach the clips, then ...
Kia Soul EV (PS EV) 2015-2020 Service Manual: Auto Light Sensor Repair procedures
Inspection In the state of IGN1 ON, when the multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor''s input. During IGN1 ON, the BCM monitors the range of this supply and alerts the f ...
Copyright © www.ksoulev.com 2020-2025
