Kia Soul EV: Heat Pump / Refrigerant Direction Control Valve Description and Operation
Changes the valve outlet direction with an electric signal to
switch the refrigerant flow direction. This switching of refrigerant
flow direction allows activation of A/C Mode and Heat Pump Mode.
Components Location
1. 3-Way Solenoid Valve Assembly2. 2-Way Solenoid Valve Assembly
...
Inspection
1. Vcc2. Ground
Check the voltage between terminals 6 and 7.
1.
Using the tester, check the resistance between terminals 1 and 2.
TemperatureResistance [K?]°C°F-30-228.7~9.5- ...
Other information:
Description
The Front Impact Sensors (FIS) are installed in the Front End
Module (FEM). These remote sensors are used to detect acceleration due
to a collision at the mounting location.
The primary purpose of the Front Impact Sensor (FIS) is to
provide an indication of a collision. The Fr ...
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Loosen the bolt and then disconnect the universal joint assembly (A) from the pinion of the steering gear box.
Tightening torque :
32.4 ~ 37.3N.m (3.3 ~ 3.8kgf.m, 23.9 ~ 27.5lb- ...