Other information:
Inspection
1.
Measure the pressure of high pressure line by measuring voltage output between terminals No. 1 and No. 2.
2.
Inspect the voltage value whether it is within the specified range.
Voltage = 0.00878835 * Pressure + 0.5[PSIA]
3.
If the measured voltage value is not within t ...
Description
The system temperature is calculated by the BMS based on 8
temperature sensor signals. And the cooling fan is conrolled in 9 steps
to maintain the normal temperature of high voltage battery system.
The air-cooling method is applied in the cooling system where
indoor air is used ...