Other information:
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the lower crash pad switch assembly (A) by pushing it.
4.
Disconnect the connectors (A) from the lower crash pad switch assembly.
5 ...
Schematic Diagrams
Input Connector (AC)
TerminalDescriptionSpecificationCurrent (normal)Voltage (maximum)1Phase voltage (L1)_220VAC33A310VAC2Ground3Phase voltage (L2)_220VAC
Output Connector (DC)
TerminalDescriptionSpecificationCurrent (normal)Voltage (maximum)1High Voltage Battery (-)25 ...