Kia Soul EV: Tail Gate / Tail Gate Back Panel Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body (Interior and Exterior) / Tail Gate / Tail Gate Back Panel Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
Remove the tail gate trim.
(Refer to Tail Gate - "Tail Gate Trim")
2.
Disconnect the back view camera connector (A).

3.
Loosen the tail gate back panel mounting nuts (A).

4.
Using a screwdriver or remover, remove the tail gate back panel (A).

5.
Install in the reverse order of removal.
   
Make sure that the connectors are plugged in properly.
Replace any damaged clips.
Tail Gate Back Panel Components and Components Location
Component Location 1. Tail gate back panel ...

Tail Gate Lift Repair procedures
Replacement     • Take care to not let the tail gate fall on you as the lifts are removed. Have a helper hold the tail gate open, or use a secure method to hol ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Pre-Charge Registor Specifications


Spectification ItemSpecificationCoilCapacity (W)60Resistance (?)30 ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Parking Assist Sensor Repair procedures


Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front/rear bumper cover. (Refer to Body - "Front Bumper Cover") (Refer to Body - "Rear Bumper Cover") 3. Disconnect the connector (A) from the ultrasonic sensor. [Front sensor, Rear center sensor] [Rear side senso ...

Copyright © www.ksoulev.com 2020-2025