Other information:
Removal
1.
Turn ignition OFF and disconnect the negative (-) battery cable.
2.
Remove the floor console upper cover.
(Refer to Body group - "Console")
3.
Remove the EPB switch assembly.
Installation
1.
Install the EPB switch assembly to the floor console upper cover.
2.
...
Inspection
1.
Check that the red light flickers when the door lock or unlock button is pressed on the transmitter.
2.
Remove the battery (A) and check voltage if the red light doesn''t flicker.
Standard voltage : 3V
3.
Insert the battery (A) into the tester (09954-2P100).
4.
Pus ...