Other information:
Replacement
•
When installing the belt, be careful not to damage the retractor.
1.
Remove the rear seat back cover [LH].
(Refer to Rear Seat - "Rear Seat Back Cover")
2.
After loosening the mounting nut, remove the rear center seat belt retractor ...
Warning Lamp Activation
Warning Lamp Behavior after Ignition On
As soon as the operating voltage is applied to the SRSCM ignition input, the SRSCM activates the warning lamp for a lamp check.
The lamp will turn on for 6 seconds during the initialization phase and will then turn off afterward. ...