Other information:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the high mounted stop lamp trim (A).
3.
Detach the high mounted stop lamp (A) from the tailgate after loosening the mounting bolts.
4.
Remove the high mounted stop lamp (C) after disconnecting the connector (B) and ho ...
Description
Pre-Charge Resistor is installed in the Power Relay Assembly
(PRA) and it protects the high voltage circuit by limiting the charging
current when the inverter capacitor is being pre-charged.
[With High Voltage Battery Heater System]
1. Main Relay (+)2. Main Relay (-)3. Pre Cha ...