Other information:
Replacement
[Without Heat Pump]
1.
Remove the condenser, and then use an L wrench to remove the bottom cap (B) from the condenser.
Tightening torque :
9.8 ~ 14.9 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)
2.
Remove the desiccant (A) from the condenser using a long
nose plier. Che ...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the license plate lamp assembly (A).
3.
Replace the bulb (B) after removing the license plate lamp (A).
Installation
1.
Install the bulb.
2.
Install the license plate lamp assembly. ...