Other information:
Inspection
Front Power Window Motor
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
3.
Disconnect the connector (A) from the motor.
(A : Safety, B : Standard)
4.
Connect the motor terminals directly to battery vol ...
Components
Connector Pin Information
No.DescriptionNo.Description1Ground signal 3 (Power ground)21Trip switch (-) input2Illumination output (-)22Trip switch 1 (+) input(Trip button)3Rheostat switch down input23Trip switch 2 (+) input(Cruise button)4Rheostat switch up input24-5Detent output (+) ...