Other information:
Replacement
1.
Remove the front bumper.
(Refer to Front Bumper - "Front Bumper Cover")
2.
Loosen the screws, and then remove the charge door open cover lamp (A).
3.
Disconnect the notification for charge door open cover actuator (A) and charge door opener cover lamp connector (B).
4. ...
Inspection
1.
Turn the ignition switch ON.
2.
Connect the GDS.
3.
Emit intensive light toward the photo sensor using a lamp, and check the output voltage change.
4.
The voltage will rise with higher intensive light and reduce with lower intensive light.
1. Auto Light Signal2. Auto ...