Other information:
Hub nut tightening sequence
Tighten the hub nuts as follows.
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
When using an impact gun, final tightening torque should be checked using a torque wrench.
Run out inspection
1.
Jack up the ...
Inspection
1.
Lift the vehicle.
2.
Remove the under cover.
(Refer to Traction Motor System - "under cover")
3.
Remove the oil filler plug (A).
4.
Check the oil condition and then oil level (A).
If the oil level is low, supplement the oil up to filler pl ...