Other information:
Operation Condition
1.
The power supplied to the PTC heater should be within DC 240V - 420V (high voltage).
2.
The power supplied to the PTC heater should be within 9.0V - 16.0V (low voltage).
3.
The interlcok and insulation resistance must be normal.
4.
The engine must be running.
...
Inspection
1.
The windshield deicer switch inputs can be checked using the GDS.
2.
To check the input value of windshield deicer switch, select "Body Control Module" menu.
3.
Select "Current Data" menu.
4.
To perform functional test on SJB outputs, select "Actuation Test".
Removal
...