Kia Soul EV: Airbag Module / Curtain Airbag (CAB) Module Description and Operation
Curtain airbags are installed inside the headliner (LH and
RH) to protect the driver and passenger from danger when side crash
occurs. The SRSCM determines deployment of curtain airbag by using side
impact sensor (SIS) signal.
Never attempt to measure the circuit resistance of the airbag
module even with a specified tester as measuring circuit resistance
with a tester may result in accidental airbag deployment that leads to
serious personal injury. |
Removal
The side airbag cannot be disassembled from the seat back assembly, so replace assembly when replacing the side airbag.
1.
Disconnect the battery negative c ...
Other information:
Description
Quick Charge Relay Assembly (QRA) is installed in the high
voltage joint box and it consists of main relays which control the high
voltage. The QRA controls the high voltage between the high voltage
battery pack and the high voltage joint box by BMS control signal. If
the QRA ...
Removal
1.
Open the roller blind using the panorama sunroof switch.
•
Leave 10 ~ 20cm (0.3937 ~ 0.7874 in) of the roller blind unopened.
2.
Remove the roof trim.
(Refer to Roof Trim - "Roof Trim Assembly")
3.
Remove the roller blind bar (C) by ...