Inspection
1.
Check for resistance between terminals in each switch position.
[Voice + Bluetooth]
[Voice + Bluetooth]
SwitchConnector terminalResistance (±5%)Output voltage (± 0.22)Voice2-4 ...
Troubleshooting
Trouble SymptomProbable CauseRemedyNot pairingBluetooth device of Car is not in discoverable modeEnter Bluetooth pairing (searching) modeUser’s phone is Bluetooth off modeSet us ...
Removal
1.
Loosen the windshield wiper arm nut (B) after removing the wiper cap (A).
2.
Remove the windshield wiper arm and blade.
3.
If necessary, release the wiper blade fixing clip by pulling up and remove the wiper blade from the inside radius of wiper arm.
4.
Disconnect the wash ...
Inspection
1.
Check the tire pressure.
(230+7 kPa (33psi+1.0psi)
2.
Check the tire tread wear.
(Refer to Suspension System - "Tire")
3.
Check if the wear of tire tread is uneven.
(Refer to Suspension System - "Alignment") ...