Kia Soul EV: Indicators And Gauges / Troubleshooting

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body Electrical System / Indicators And Gauges / Troubleshooting

Troubleshooting
Fault item
Symptom
Check point
Related parts
Display
OLED-LCD NOT displaying 
1)
Check the connection between connectors
2)
Check the Battery (+), Ignition and Ground wiring
3)
Check the parts
Connectors, Wiring, Fuse and Cluster
Airbag Warning indicator
Airbag warning indicator NOT light
1)
Check the Airbag (+) signal (Connector)
2)
Check the C-CAN signal
3)
Check the connection stuts of FPC
ACU connector, Wiring, Fuse and Cluster
Mode change
Trip mode malfunction
1)
Check the switch input terminal (Connector)
2)
Chech the signal input (Open or short)
3)
Check the mode change of cluster
Switch connector, Wiring and Cluster
Illumination
Illumination NOT changing
1)
Check rheostat input signal to connector
2)
Check Illumination (-) and Detent signal output
3)
Check Tail (+) signal input
Switch connector, Wiring and Cluster
Cluster Warning sound
No cluster warning sound
1)
Check the connector of speaker output terminal
2)
Check the installed speaker on the vehicle
Switch connector, Wiring and Cluster

Instrument Cluster Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the cluster fascia panel. (Refer to Body - "Cluster Fascia Panel") 3. Remove the cluster (A) after removing screws. ...

Keyless Entry
...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: High Voltage Battery Heater Description and Operation


Description High Voltage Battery Heater is installed in every module and it is controlled by heater relay. High Voltage Flow Control FlowOperation ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: High Voltage Battery Heater Temperature Sensor Repair procedures


Inspection     High voltage battery heater temperature sensor is installed in modules No. 1 and No. 8. 1. Turn the ignition switch OFF. 2. Shut off the high voltage. (Refer to Battery Control System - "High Voltage Shut-off Procedure") 3. Remove the high volt ...

Copyright © www.ksoulev.com 2020-2025