Other information:
Troubleshooting
Fault codeFail descriptionRemedy61Compressor CAN signal faultCompressor operation state error receive1. Check HV, LV connector connection. 2. Check LV connector pin condition. 3. Check vehicle inverter fuse condition. 4. A/C ON then check compressor operatio ...
Inspection
Front Door Lock Module Inspection
1.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
2.
Remove the front door module.
(Refer to Body - "Front Door Module")
3.
Disconnect the connectors from the actuator.
4.
Check actuator operation by connecting power an ...