Other information:
Inspection
Power Window Main Switch Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
3.
Disconnect the connector (A) from the power window switch module.
4.
Check for continuity between the terminals in e ...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Using the flat screw driver or remover, remove the crash pad center air vent panel (A).
3.
Disconnect the hazard switch connector (A).
4.
Remove center fascia upper panel (A) after loosening the mounting screws.
5.
Disco ...