Kia Soul EV: Fuses And Relays / ICM (Integrated Circuit Module) Relay Box Repair procedures
Normal Charge Port Relay
Check for continuity between the terminals.
1. |
There should be continuity between terminals No.20 and No.10
when power and ground are connected to terminals No.10 and No.9 in the
ICM-A. |
Folding Motor Relay
Check for continuity between the terminals.
1. |
There should be continuity between terminals No.16 and No.17
when power and ground are connected to terminals No.4 and No.8 in the
ICM-A. |
Unfolding Motor Relay
Check for continuity between the terminals.
1. |
There should be continuity between terminals No.15 and No.17
when power and ground are connected to terminals No.6 and No.8 in the
ICM-A. |
Description
The ICM relay is integrated with outside mirror fold/unfold
relay, front deicer relay and rear fog lamp relay and is installed
inside the lower crash pad. ...
Other information:
Component
1. High Voltage Battery Heater2. High Voltage Battery Heater Relay3. High Voltage Battery Heater Fuse4. High Voltage Battery Heater Temperature Sensor
...
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Loosen the bolt (A) and then disconnect the universal joint assembly from the pinion of the steering gear box.
Tightening torque:
32.4 ~ 37.3N.m (3.3 ~ 3.8kgf.m, 23.9 ~ 27.5lb-f ...