Kia Soul EV: Smart Key System / Smart Key Unit Repair procedures
Kia Soul EV (PS EV) 2015-2020 Service Manual / Body Electrical System / Smart Key System / Smart Key Unit Repair procedures
| Inspection |
Smart Key Unit
| – |
Refer to Smart key System - "Smart key Diagnostic" |
Smart Key Switch
| – |
Refer to Smart key System - "Smart key Diagnostic" |
Antenna
| – |
Refer to Smart key System - "Smart key Diagnostic" |
Trunk Lid Open Switch
| 1. |
Check for continuity between trunk lid open switch terminals.
|
| 2. |
If continuity is not as specified, inspect the switch.
|
| Removal |
Smart Key Unit
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the main crash pad assembly.
(Refer to Body - "Main Crash Pad Assembly") |
| 3. |
Loosen the mounting bolts and nut from the smart key unit bracket.
|
| 4. |
Remove the smart key unit (B) after disconnecting the connector (A) from the smart key unit.
|
Interior Antenna 1
| 1. |
Disconnect the negative(-) battery terminal. |
| 2. |
Remove the floor console assembly.
(Refer to Body - "Floor Console Assembly") |
| 3. |
Disconnect the connector (A) from the interior antenna.
|
| 4. |
Remove the interior antenna (A) after loosening the mounting nuts.
|
Interior Antenna 2
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Disconnect the connector (A) from the interior antenna 2. |
| 3. |
Remove the interior antenna 2 (B) after loosening the mounting nuts.
|
Exterior Bumper Antenna
| 1. |
Disconnect the negative(-) battery terminal. |
| 2. |
Remove the rear bumper cover.
(Refer to Body - "Rear Bumper Cover") |
| 3. |
Disconnect the connector (A), and then remove the rear bumper antenna (B) by loosening the mounting screws.
|
Buzzer
| 1. |
Disconnect the negative(-) battery terminal. |
| 2. |
Remove the front left wheel guard. |
| 3. |
Remove the buzzer (B) after disconnecting the connector (A).
|
Door Outside Handle
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the front door module.
(Refer to Front Door - "Front Door Module") |
| 3. |
Remove the hole plug (A). |
| 4. |
After loosening the mounting bolt, then remove the front door outside handle cover (B).
|
| 5. |
Remove the front door outside handle (A) by sliding it rearward.
|
Tailgate Open Switch
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the tailgate trim.
(Refer to Body - "Tail Gate Trim") |
| 3. |
Disconnect the tailgate open switch connector (A).
|
| 4. |
Remove the tailgate switch (A).
|
| Installation |
Smart Key Unit
| 1. |
Install the smart key unit. |
| 2. |
Connect the connector and install the smart key unit. |
| 3. |
Install the main crash pad assembly. |
| 4. |
Install the negative (-) battery terminal and check the smart key system. |
Interior Antenna 1
| 1. |
Install the interior antenna. |
| 2. |
Install the floor console assembly. |
| 3. |
Install the negative (-) battery terminal and check the smart key system. |
Interior Antenna 2
| 1. |
Install the interior antenna 2. |
| 2. |
Install the rear seat cushion assembly. |
| 3. |
Install the negative (-) battery terminal and check the smart key system. |
Exterior Bumper Antenna
| 1. |
Install the exterior bumper antenna. |
| 2. |
Install the rear bumper cover. |
| 3. |
Install the negative (-) battery terminal and check the smart key system. |
Buzzer
| 1. |
Install the buzzer. |
| 2. |
Install the front left wheel guard. |
| 3. |
Install the negative (-) battery terminal and check the smart key system. |
Door Outside Handle
| 1. |
Install the door outside handle. |
| 2. |
Install the door trim. |
| 3. |
Install the negative (-) battery terminal and check the smart key system. |
Tailgate Open Switch
| 1. |
Install the tailgate open switch. |
| 2. |
Install the tailgate trim. |
| 3. |
Install the negative (-) battery terminal and check the smart key system. |
Smart Key Unit Schematic Diagrams
Circuit Diagram
...
Smart Key Diagnostic Repair procedures
Inspection
Self Diagnosis With GDS
Smart key system defects can be quickly diagnosed with the
GDS. GDS quickly operates actuator to monitor input/ouput values and
self diagnose.
The following ...
Other information:
Kia Soul EV (PS EV) 2015-2020 Service Manual: Rheostat Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the lower crash pad switch assembly (A) by pushing it. 4. Disconnect the connectors (A) from the lower crash pad switch assembly. 5 ...
Kia Soul EV (PS EV) 2015-2020 Service Manual: Relay Box (Engine Compartment) Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Pull out the relay from the engine compartment relay box. Power Relay (Type A) – Do not use pliers. – Pliers will damage the relays, which could cause the engine to stall or n ...
Copyright © www.ksoulev.com 2020-2024
