Other information:
Inspection
High voltage battery heater temperature sensor is installed in modules No. 1 and No. 8.
1.
Turn the ignition switch OFF.
2.
Shut off the high voltage.
(Refer to Battery Control System - "High Voltage Shut-off Procedure")
3.
Remove the high volt ...
Inspection
Normal Charge Port Relay
Check for continuity between the terminals.
1.
There should be continuity between terminals No.20 and No.10
when power and ground are connected to terminals No.10 and No.9 in the
ICM-A.
Folding Motor Relay
Check for continuity between the terminals.
...