Other information:
Replacement
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
Loosen the rear door inside handle mounting screws (A).
3.
Using a flat-tip screwdriver (B), pull up the rear door inside handle lock pin (C).
4.
Remove the rear door inside handle (A).
5.
Inst ...
Description
The heater unit includes mode control actuator and temperature control actuator.
Located in the heater unit, the temperature control actuator regulates the temperature in the following procedures.
Signal from control unit adjusts the position of the
temperature door by operating ...