Other information:
Adjustment
1.
After loosening the tail gate hinge (A) mounting bolt, adjust the tail gate by moving it up and down, or right and left.
2.
Adjust the tail gate height by turning the tail gate overslam bumpers (B).
3.
After loosening the tail gate striker (C) mounting bolts,
adjust the t ...
Replacement
1.
Loosen the rear door checker (B) mounting bolt.
Tightening torque :
16.7 ~ 21.6 N.m (1.7 ~ 2.2 kgf.m, 12.3 ~ 15.9 lb-ft)
2.
Detach the clips, then remove the rear door side weatherstrip (A).
3.
Install in the reverse order of removal.
...