Other information:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the gear knob (A) from the console upper cover after pulling it out upward.
3.
Using a screw driver or remover, remove the console upper cover (A).
4.
Disconnect the indicator connector (A) and start/stop switch conne ...
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the rear wheel and tire (A) from rear hub.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
3.
Loosen the guide rod bolt (B) and the remove ...