Other information:
Removal
1.
Turn ignition OFF and disconnect the negative (-) battery cable.
2.
Remove the floor console assembly.(Refer to Body - “Floor console assembly")
3.
Disconnect the EPB control unit mounting nuts and then remove EPB control unit.
Tighten torque:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 ...
Description
System Overview
The System offers the following features:
–
Human machine interface through a 1-stage button, for terminal switching and engine start.
–
Control of external relays for ACC / IGN1 / IGN2 terminal switching and STARTER, without use of mechanical i ...