Replacement
1.
Using a screwdriver or remover, remove the hood release handle (A).
•
Use a 6mm hex bit to press the center until the handle easily pulls off ...
Replacement
1.
Remove the charge door handle (A).
2.
Loosen the front bumper upper cover mounting bolts and clips.
3.
Gently lift the bumper upper cover.
4.
Loosen the screw (B), and t ...
Description
Emergency Fastening Device (EFD) is deployed concurrently
with the Belt Pretensioner to strongly pull down the seat belt during a
deployment condition after a collision. It is located near the anchor on
driver and passenger seats to make up for the existing short stroke.
EFD i ...
Inspection
1.
Check for continuity between the terminals while operating
the wiper and washer switch. If it is not normal condition, replace
wiper and wiper switch.
Rear Wiper Switch
Rear Washer Switch ...