Kia Soul EV: SRSCM / Occupant Detecting Sensor (ODS) Description and Operation
In order to make normal activation of airbag system, SRSCM
detects DTC(s) for the Passenger side Body Detection System. If the seat
is occupied, Body sensor detects how measuring electrostatic capacity
and send signal to SRSCM via CAN. SRSCM recognizes the signal as 2(two)
different classifications; that is, class #1 (Empty or child seat),
class #2 (Small, Large).With these signal, ACU determines whether it
needs to deploy PAB(Passenger Airbag) or not.
If you strike or spin the SRSCM with the IG “ON”, the
seat-belt pretensioner, curtain-airbag or side-airbag could be deployed.
Handle it with care. |
Removal
1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2.
Remove the front seat assembly.
(Refer to Body - "Front seat")
3.
Remove th ...
Other information:
Inspection
In the state of IGN1 ON, when the multi function switch
module detects auto light switch on, tail lamp relay output and head
lamp low relay output are controlled according to auto light sensor''s
input.
During IGN1 ON, the BCM monitors the range of this supply and
alerts the f ...
Description
Emergency Fastening Device (EFD) is deployed concurrently
with the Belt Pretensioner to strongly pull down the seat belt during a
deployment condition after a collision. It is located near the anchor on
driver and passenger seats to make up for the existing short stroke.
EFD i ...