Other information:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the floor console upper cover.
(Refer to Body - "Floor Console Assembly")
3.
Remove the multimedia jack (A).
Installation
1.
Install the multimedia jack.
2.
Install the floor console upper cover.
3.
Connect ...
Schematic Diagrams
MDPS Circuit Diagram
Harness Connector
ConnectorPin No.Pin NameBattery1Battery +2Battery -Vehicle signal1Ignition2N.C.3N.C.4N.C.5N.C.6N.C.7CAN_High8CAN_Low
...