Kia Soul EV: Heating,Ventilation, Air Conditioning / Special Service Tools

Kia Soul EV (PS EV) 2015-2020 Service Manual / Heating,Ventilation, Air Conditioning / Special Service Tools

Special Service Tools

Personal Protective Equipment

Name	Illustration	Description
Insulation gloves		Used when inspecting or working on the high voltage components [Insulation performance : 1000V / 300A or above]
Insulation shoes		Used when inspecting or working on the high voltage components
Insulation clothes
Insulation helmet
Safety glasses		Used in the following cases : • When removing, installing or inspecting the high voltage battery terminals or wiring where spark may occur. • When working on the high voltage battery pack assembly.
Face shield
Insulation mat		Removed high voltage components are placed on the insulation mat to prevent safety accidents.
Insulation sheet		High voltage components are covered with insulation sheet to protect people not wearing personal protective equipment from safety accidents.

Specifications

Specification Air Conditioner ItemSpecificationCompressorTypeESC33n (Electric Scroll)Communication typeCAN communicationOil type & CapacityPOE OIL, 180±10gMotor typeBLDCRated voltage360VOpe ...

Troubleshooting

Troubleshooting Problem Symptoms Table Before replacing or repairing air conditioning components, first determine if the malfunction is due to lack of refrigerant, air flow or compressor. U ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Hood Insulator Pad Repair procedures

Replacement 1. Using a clip remover, detach the clips, and remove the hood insulator pad (A). • Be careful not to scratch the hood panel. 2. Install in the reverse order of removal. • Replace any damaged clips ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Electric Parking Brake (EPB) Repair procedures

Removal 1. Turn ignition OFF and disconnect the negative (-) battery cable. 2. Remove the floor console assembly.(Refer to Body - “Floor console assembly") 3. Disconnect the EPB control unit mounting nuts and then remove EPB control unit. Tighten torque: 3.9 ~ 5.9 N.m (0.4 ~ 0.6 ...