Other information:
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the negative (-) battery terminal.
3.
Verify that the auto defogging actuator operates to the open
position when 12V is connected to terminal 3 and ground to terminal 4.
Verify that the auto defogging actuator operates to the c ...
Components
Connector Pin Function
Pin No.Connector AConnector BConnector C1ILL (+)GroundElectric compressor interlock (+)2Sensor REF (+5V)Sensor groundElectric compressor interlock (-)3C_CAN HighBlower PWM INHigh voltage PTC heater interlock (+)4C_CAN LOWIonizer diagnosisHigh voltage PTC heate ...