Other information:
Removal
Main Relay, Pre Charge Relay, Pre Charge Resistor, Battery
Current Sensor, High Voltage Battery Heater Relay and the High Voltage
Battery Heater Fuse are integrated in the Power Relay Assembly (PRA). So
Refer to the removal procedure of Power Relay Assem ...
Inspection
1.
Turn the ignition switch ON.
2.
Connect the GDS.
3.
Emit intensive light toward the photo sensor using a lamp, and check the output voltage change.
4.
The voltage will rise with higher intensive light and reduce with lower intensive light.
1. Auto Light Signal2. Auto ...