Other information:
Replacement
1.
Loosen the rear door checker (B) mounting bolt.
Tightening torque :
16.7 ~ 21.6 N.m (1.7 ~ 2.2 kgf.m, 12.3 ~ 15.9 lb-ft)
2.
Detach the clips, then remove the rear door side weatherstrip (A).
3.
Install in the reverse order of removal.
...
Inspection
1.
Turn the ignitionswitch OFF.
2.
Shut off the high voltage.
(Refer to Battery Control System - "High Voltage Shut-off Procedure")
3.
Remove the high voltage battery System assembly.
(Refer to High Voltage Battery System - Repair procedures - "Removal")
4.
Remove the h ...