Other information:
Inspection
1.
Close the panorama sunroof glass and blind completely (Full close position).
2.
Disconnect the negative (-) battery terminal.
3.
Remove the roof trim assembly.
(Refer to Body - "Roof Trim")
4.
Remove the panorama sunroof glass motor (A) after loosening the screws and d ...
Operation Condition
1.
The power supplied to the PTC heater should be within DC 240V - 420V (high voltage).
2.
The power supplied to the PTC heater should be within 9.0V - 16.0V (low voltage).
3.
The interlcok and insulation resistance must be normal.
4.
The engine must be running.
...