Other information:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the gear knob (A) from the console upper cover after pulling it out upward.
3.
Using a screw driver or remover, remove the console upper cover (A).
4.
Disconnect the indicator connector (A) and start/stop switch conne ...
Components Location
1. High Voltage Battery System Assembly2. Electronic Power Control Unit (EPCU) [LDC+Inverter+VCU]3. ON-Board Charger (OBC)4. High Voltage Joint Box5. High Voltage Cable6. Motor Assembly7. Reduction
...