Other information:
Removal
1.
Disconnect the battery negative cable, and wait for at least thirty seconds before beginning to work.
2.
To remove the emergency fastening device (C), keep on pushing
the lock pin (A) in the direction of arrow. And then remove the seat
belt after pushing the lock pin (B).
...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the evaporator temperature sensor connector.
3.
Measure the resistance between terminals "1" and "2" of the evaporator temperature sensor.
4.
Connect the evaporator temperature sensor connector.
5.
Run the engine and turn ...