Other information:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the gear knob (A) from the console upper cover after pulling it out upward.
3.
Using a screw driver or remover, remove the console upper cover (A).
4.
Disconnect the indicator connector (A) and start/stop switch conne ...
Description
Battery Current Sensor is installed in the Power Relay
Assembly and it measures the current when the high voltage battery is
being charged or discharged.
[With High Voltage Battery Heater System]
1. Main Relay (+)2. Main Relay (-)3. Pre Charge Relay4. Pre Charge Resistor5. B ...