Other information:
Replacement
•
Put on gloves to protect your hands.
1.
Remove the ECM mirror cover (A).
2.
Disconnect the ECM mirror connector (B).
3.
Loosen the ECM mirror mounting screw (B).
4.
Push the ECM mirror base up to remove the ECM mirror assembly ...
System Circuit Diagram
Connector Location
BMS ECU Connector And Terminal Function
BMS ECU Terminal Function
A Connector [B01-A] (35 Pin) - Voltage Measurement Connector
Pin no.DescriptionConnected to1Battery Cell [Module 8/Cell 13] Voltage InputBattery Cell [Module 8/Cell 13]2Battery Cell ...