Replacement
•
When installing the belt, be careful not to damage the retractor.
1.
Remove the rear seat back cover [LH].
(Refer to Rear Seat - "Rear Se ...
Replacement
[LH]
1.
Detach the rear seat belt lower anchor (C) by pushing the lock pin (B) of center mini buckle (A) with flat-tip driver.
2.
Remove the rear seat cushion assembly.
(Refer ...
Inspection
1.
Turn the ignition switch OFF.
2.
Manually operate the control switch and measure the voltage of blower motor.
3.
Select the control switch to raise voltage until high speed.
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box housin ...
Component
1. High Voltage Battery Heater2. High Voltage Battery Heater Relay3. High Voltage Battery Heater Fuse4. High Voltage Battery Heater Temperature Sensor
...