Other information:
Replacement
•
When installing the belt, be careful not to damage the retractor.
1.
Remove the rear seat back cover [LH].
(Refer to Rear Seat - "Rear Seat Back Cover")
2.
After loosening the mounting nut, remove the rear center seat belt retractor ...
Inspection
1.
Check the condenser fins for clogging and damage. If clogged,
clean them with water, and blow them with compressed air. If bent,
gently bend them using a screwdriver or pliers.
2.
Check the condenser connections for leakage, and repair or replace it, if required.
Replaceme ...