Other information:
Inspection
Battery Voltage and Status
Check the battery voltage and status using the battery tester.
Battery Terminal
1.
Move back and forth to check that the battery terminals (A) are loose or corroded.
If the terminals are corroded, clean them.
If battery posi ...
Inspection
1.
Turn the ignition switch OFF and disconnect the auxiliary battery (12V) negative (-) terminal.
2.
Connect the GDS to DLC.
3.
Turn the ignition switch ON.
4.
Inspect "Control Duty" and waveforms according to "Fan Status" by performing "Actuation Test" on GDS.
Cooling ...