Kia Soul EV: High Voltage Battery System / Quick-Charger Relay Assembly (QRA) Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / EV Battery System / High Voltage Battery System / Quick-Charger Relay Assembly (QRA) Repair procedures

Removal

QRA is integrated into the high voltage joint box and so each part cannot be replaced separately. Refer to removal procedure of high voltage joint box.

Installation

QRA is integrated into the high voltage joint box and so each part cannot be replaced separately. Refer to removal procedure of high voltage joint box.

Quick-Charger Relay Assembly (QRA) Description and Operation

Description Quick Charge Relay Assembly (QRA) is installed in the high voltage joint box and it consists of main relays which control the high voltage. The QRA controls the high voltage between ...

Case Repair procedures

Removal • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure t ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Power Window Switch Repair procedures

Inspection Power Window Main Switch Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim. (Refer to Body - "Front Door Trim") 3. Disconnect the connector (A) from the power window switch module. 4. Check for continuity between the terminals in e ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Passenger Airbag (PAB) Module Description and Operation

Description Passenger Airbag (PAB) module is located in the passenger crash pad. The PAB contains 2 firing squibs of airbag and 1 firing squib of active vent. The deployment timing of both 2 firing squibs of airbag and 1 firing squib of active vent depends on the crash speed or the level ...